Preparations before starting up
Adjust the size of the bag according to the process requirements, install the heat-sealing knife, and initially adjust the positions of the sealing knife and heat-sealing knife;
Turn on the power, set the temperature of the heat-sealing knife according to the process requirements, and input the relevant data of making bags and the quantity of each bundle;
If the color difference of the pattern on the bag is large, it is necessary to adjust the sensitivity of the light eye;
Fully automatic non-woven bag making machine starts production
Start the host machine at low speed, adjust the side sealing photoelectric, and split the film in half;
Adjust the left and right clamping rods to align the left and right films, and then adjust the front and rear clamping rods to align the patterns;
Adjust the heat-sealing knife so that its temperature is within the heat-sealing range of the bag;
Adjust the sub-slicing and punching position to the desired position;
First inspection, check the sample bag;
According to the problem of the bag, adjust the bag making machine until the bag that meets the requirements is produced;
After no problem, put into production.
Automatic non-woven bag making machine production end or shutdown
After stopping the machine, put a cloth pad to avoid breaking the film;
Turn off the temperature control, water and air compressor;
Remove the offcuts;
Clean the machine and clean up.